Sat Receivers ForumLog in

HD - UHD - 4K - HEVC RECEIVERS FORUM

Please check out the new section for UHD/HEVC receivers. Everyone is invited to write his opinion and experiences with these new boxes. Thanks.
Android or Enigma2 receivers? Poll is in Global Announcement.

Share

descriptionInstalling E2 usb images

more_horiz
1st method  


Once multiboot has been installed installed you can continue to install Enigma2 on USB Drive.

Download the Enigma2 image you want to install. It should be called  imagename-version.tar.gz.

Boot to your DGS based image and start a telnet session with it.

################################################## #####

1: Insert your USB drive and format it as follows in your telnet session. Execute the commands one at a time.

umount /dev/sda1
mkfs.ext2 /dev/sda1
mount /dev/sda1 /mnt/usb/usb0


2: Use your favourite FTP program to tansfer the downloaded image file to your usb drive, which should be mounted at /mnt/usb/usb0 at this stage.

3: Extract the image to the pen drive.....

cd /mnt/usb/usb0
tar xzvf imagename-version.tar.gz


4.When extraction is finished
sync

When this completes, you should be able to reboot and boot into Enigma2 by pressing and holding the corresponding button on your remote while the LCD display reads 'Booting'.

___________________________________


Vu+Solo SE
IPBOX 910HD
Edision Progressiv HDc+
GooBang Doo ABOX Smart TV


[You must be registered and logged in to see this link.]

Locuri de munca in Europa

descriptionRe: Installing E2 usb images

more_horiz
Method 2

Enigma 2 usb stick for beginners

First you need to have multiboot installed, flash image working and an usb flash drive attached to the box
You need a ftp program like DCC (dreambox control center) or putty to have ftp and telnet options
and connect it with your receiver
Make the following commands one at a time

fdisk /dev/sda
p
n
p
1
"enter"
"enter"
w
mkfs.ext2 /dev/sda1 -L ext2
mount /dev/sda1 /mnt/usb


through ftp copy the imagename.tar.gz in mnt/usb
then in telnet  :

cd /mnt/usb
tar -vxzf imagename.tar.gz


it starts to decompress
after finish add command :
sync

Disconnect the box from power source and reconnect it and press the button wich is assigned in multiboot for E2 usb image
In 3-4 minutes you will have a working E2 image

!!!If you have HDD installed in your receiver then use in command sdb1 instead of sda1

___________________________________


Vu+Solo SE
IPBOX 910HD
Edision Progressiv HDc+
GooBang Doo ABOX Smart TV


[You must be registered and logged in to see this link.]

Locuri de munca in Europa

descriptionRe: Installing E2 usb images

more_horiz
Svaka cast drug ... Sve najbolje !!! Pozdrav

descriptionRe: Installing E2 usb images

more_horiz
NICE AND THANKS

descriptionRe: Installing E2 usb images

more_horiz
don't work for me, please help me.

descriptionRe: Installing E2 usb images

more_horiz
Permissions in this forum:
You cannot reply to topics in this forum